 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Portable IMVP-IVTM and IMVP-IV+TM Single Phase Power Supply Controller POWER MANAGEMENT Description The SC451 PowerStep IVTM IC is a single chip high-performance Hysteretic PWM controller. With its integrated SmartDriverTM, it powers advanced IMVP-IVTM and IMVP4+TM processors. The SC451 features extended Intel Mobile Voltage Positioning (IMVPTM) to increase battery life by reducing the voltage at the processor when it is heavily loaded. It directly supports Intel's SpeedStep(R) processors for even longer battery life. The SC451 fully supports the Intel(R) Geyserville-III core voltage specification. It provides direct "deeper sleep" mode and boot voltage support. Automatic "power-save" is present to prevent negative current flow in the low-side FET during light loading conditions, saving even more power. The high side driver initially turns on with a weak drive to reduce ringing, EMI, and capacitive turn-on of the low side. SC451 Features ! IMVP-IVTM and IMVP-IV+TM compliant single chip ! ! ! ! ! solution On-chip CLK_ENABLE# and IMVP4_PWRGD outputs Backward compatible with SC1479 High-speed hysteretic controller Single-phase operation Selectable analog or VID controlled DeeperSleep setting 6 bit VID programmable output Integrated drivers with soft high side turn-on Programmable softstart Programmable boot voltage Programmable DeeperSleep voltage Under-voltage lock out on VccA Over-voltage protection on CORE Current limit protection on CORE Thermal protection Powergood flag with blanking during VID or DeeperSleep mode changes Automatic powersave at light load TSSOP-28 and TSSOP-38 package options ! ! ! ! ! ! ! A 6-bit DAC, accurate to 0.85%, sets the output voltage ! reference, and implements the 0.700V to 1.708V range ! required by the processor. The hysteretic converter uses a ! comparator without an error amplifier, and therefore provides the fastest possible transient response, while avoiding the stability issues inherent to classical PWM controllers. The DAC is externally slew rate limited to minimize transient currents and audible noise. The SC451 operates from 5VDC and also features softstart, an open-drain PWRGD signal with power-good blanking, and an enable input. Programmable current limiting shuts down the SC451 after 32 current limit pulses. It comes in both a TSSOP-28 and TSSOP-38 package. The TSSOP-38 provides a pin-to-pin upgrade to a dual-phase solution using Semtech's dual-phase controller, SC450. ! ! Applications ! Low power Notebook and Laptop computers ! Embedded Applications PowerStep IVTM is a trademark of Semtech Corporation. Other trademarks or registered trademarks may be claimed as the property of others. Conceptual Application Circuit V5 V IN V CCA VC O RE 0 .7 0 0 V -1 .7 0 8 V S m a rt D rive r PW M C o n tro lle r S C 4 5 1 S in g le P h a s e IM V P -IV /IM V P -IV + P o w e r S u p p ly V ID (5 :0 ) V ID L o g ic and D AC June 6, 2005 1 www.semtech.com |
Price & Availability of SC451
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |